USE OF SHK CROWN BAR FEED COLLETS
The SHK crown bar feed collets owe their name to the special shape of the crown and are especially developed for profile material.
This geometry simplifies the threading of the material and allows the full utilization of the channel, thus larger wrench sizes can be clamped.
| A | Outside diameter |
| Z | Cross bore ID |
| P | Fit ID |
| L | Total length |
| F | Shape |
| Article | Pusher [mm] |
Ø A [mm] |
Ø P [mm] |
Ø Z [mm] |
L [mm] |
F min. – max. [mm] |
|
 |
 |
||||||
| S10 E210 |
D10 | 10 | 7H7 | 4 | 40 | 5,0 – 7,0 | 7,0 – 9,0 |
| S12 E212 |
D12 | 12 | 8H7 | 4 | 40 | 6,0 – 8,0 | 7,0 – 10,0 |
| S13 E213 |
D13 | 13 | 8H7 | 4 | 40 | 6,0 – 9,0 | 7,0 – 11,0 |
| S15 E203 |
D15 | 15 | 11H7 | 6 | 40 | 8,0 – 11,0 | 10,0 – 13,0 |
| S16 SHK16 |
D16 | 16 | 11H7 | 6 | 40 | 8,0 – 11,0 | 10,0 – 14,0 |
| S18 E218 |
D18 | 18 | 11H7 | 6 | 40 | 8,0 – 13,0 | 10,0 – 16,0 |
| S20 E225 |
D20 | 20 | 14H7 | 8 | 65 | 10,0 – 14,0 | 13,0 – 17,0 |
| S21 SHK21 |
D21 | 21 | 14H7 | 8 | 65 | PR | PR |
| S22 SHK22 |
D22 | 22 | 14H7 | 8 | 65 | 10,0 – 16,0 | 13,0 – 19,0 |
| S23 SHK23 |
D23 | 23 | 14H7 | 8 | 65 | 10,0 – 16,0 | 13,0 – 20,0 |
| S25 E222 |
D25 | 25 | 20H7 | 8 | 65 | 15,0 – 18,0 | 18,0 – 22,0 |
| S28 E227 |
D28 | 28 | 20H7 | 8 | 65 | 15,0 – 20,0 | 18,0 – 24,0 |
| S30 SHK30 |
D30 | 30 | 20H7 | 8 | 65 | 15,0 – 21,0 | 18,0 – 26,0 |
| S32 SHK32 |
D32 | 32 | 20H7 | 8 | 65 | 15,0 – 23,0 | 18,0 – 28,0 |
| S34 SHK34 |
D34 | 34 | 20H7 | 8 | 65 | 15,0 – 24,0 | 18,0 – 30,0 |
| S36 SHK36 |
D36 | 36 | 20H7 | 8 | 65 | 15,0 – 25,0 | 18,0 – 30,0 |
SQUARE
- Suitable for square material
Click on the product image to get 360° view
HEXAGON
- Suitable for hexagon material
Click on the product image to get 360° view
SQUARE TENSION
- Suitable for square material
- Tension can be increased or reduced according to requirements
Click on the product image to get 360° view
HEXAGON TENSION
- Suitable for hexagon material
- Tension can be increased or reduced according to requirements
Click on the product image to get 360° view
