Overgrip collets E145 - © Schlenker Spannwerkzeuge

OVERGRIP COLLETS

Schlenker overgrip collets are designed and manufactured to offer maximum precision and reliability.
By using them, you improve the processing quality and precision of your machines considerably.

USE OF OVERGRIP COLLETS

The overgrip collets are often used in production when the diameter to be clamped is smaller than the diameter to be overgripped. The maximum diameter difference to be overgripped should not be larger than 2.5mm. The decisive factors here are the stroke, the clamping length and the machine type which must be individually adapted to the workpiece.

OVERGRIP COLLET VERSIONS

We offer a wide range of versions for our overgrip collets. Whether you want to simplify your work, improve your production quality or satisfy a customer specific production requirement. Test our overgrip collets now, you will be convinced.

OVERGRIPPING 25°

  • Taper angle of the collet is adjusted to the respective degree
  • Producable with long nose
  • Suitable for toggle clamping
  • Taper angle of the pressure sleeve must be adapted

Click on the product image to get 360° view

OVERGRIPPING 45°

  • Taper angle of the collet is adjusted to the respective degree
  • Producable with long nose
  • Suitable for toggle clamping
  • Taper angle of the pressure sleeve must be adapted

Click on the product image to get 360° view

OVERGRIPPING 16°/45°

  • Taper angle of the collet is adjusted
  • Producable with long nose
  • Overgripping of max. 2.5 mm possible
  • The clamping stroke of the pressure sleeve should be at least 2.5 mm
  • Adaption of the taper angle of the pressure sleeve not required

Click on the product image to get 360° view

OFFSET GRIPPING

  • Are used if the diameter to be clamped is smaller than the diameter to be overgripped
  • x-axis on the sub spindle is required

Click on the product image to get 360° view

MICROCONIC OVERGRIPPING
V-TYPE

  • Available from Ø4.2 – 8.2 mm
  • Ideal for workpieces with larger diameter
  • Compatible with all M10 cartridges

Click on the product image to get 360° view

MICROCONIC OVERGRIPPING
W-TYPE

  • Available from Ø0.5 – 7.2 mm
  • Diameter difference of approx. 4 mm can be overgripped
  • Clamping surface length of approx. 1x D
  • Compatible with all M10 cartridges

Click on the product image to get 360° view

MICROCONIC OVERGRIPPING
T-TYPE

  • Available from Ø1.5 – 7.2 mm
  • Clamping surface length of approx. 2x – 3x D
  • Compatible with all M10 cartridges

Click on the product image to get 360° view