USE OF SDK-T GUIDE BUSHES
The SDK-T double cone guide bushes with integrated spring are manufactured in one piece. Due to this design, the rod material receives the maximum stability and flexibility in your application. In addition, the axial misalignment or misalignment of the rod material, is eliminated by the integrated spring. SDK-T guide bushes are especially designed for flexible guide bush systems for example JBS.
| A | Head-Ø |
| L | Total length |
| K | Taper angle |
| F | Shape |
| Artikel | Ø A [mm] |
L [mm] |
K [degree] |
F min. – max. [mm] |
 |
||||
| SDK-T24 | 24 | 35 | 22 | 3,0 – 12,0 |
| SDK-T28 | 28 | 40 | 22 | 3,0 – 20,0 |
| SDK-T33 | 33 | 40 | 22 | 3,0 – 23,0 |
| SDK-T42 | 42 | 50 | 22 | 3,0 – 32,0 |
| SDK-T48 | 48 | 60 | 22 | 3,0 – 38,0 |
| SDK-T51 | 51 | 60 | 22 | 10,0 – 38,0 |
SB DESIGN – STANDARD
- Special material with very good gliding properties
- Prevents welding of the material in the guide bush
- Ideal for material with scratch-sensitive surface
- Especially suitable for material with poor gliding properties e.g. titanium
- Guide bush is made out of one material, so it can be reground several times after wear up to the maximum material clearance diameter
Click on the product image to get 360° view
PERMAGLIS DESIGN
- Special material with very good gliding properties
- Prevents welding of the material in the guide bush
- Especially suitable for medical steels like titanium and stainless steel
- Alternative to SB design
- Guide bush is made out of one material, so it can be reground several times after wear up to the maximum material clearance diameter
Click on the product image to get 360° view
STEEL DESIGN WITH
BL COATING
- Especially suitable for material with poor gliding properties e.g. titanium
- Processing of complex profiles possible
- Prevents welding of the material in the guide bush
Click on the product image to get 360° view
CARBIDE INSERT
- High wear resistance
- Higher service life
Click on the product image to get 360° view
LONG NOSE
- Needed for special requirements where the tool has a longer distance to the guide bush carrier
Click on the product image to get 360° view
SEALING DISC
- Prevents the entry of machining chips into the spring area
Click on the product image to get 360° view
HEXAGON
- Suitable for hexagon material
Click on the product image to get 360° view
SQUARE
- Suitable for square material
Click on the product image to get 360° view
SPECIAL PROFILES
- Various profiles possible
- Profiles can be adapted individually to the workpiece
Click on the product image to get 360° view
