USE OF DRAW-IN COLLETS
Draw-in collets are used for workpiece clamping as well as in all common grinding machines, dividing heads and manual turning machines.
Clamping is performed by retracting the draw-in collet into the collet sleeve.
| d | Shaft-Ø |
| A | Head-Ø |
| L | Total length |
| K | Taper angle |
| G | Thread |
| F | Shape |
| Article | ø d [mm] |
ø A [mm] |
L [mm] |
K [degree] |
G | F min. – max. [mm] |
||
 |
 |
 |
||||||
| E324 | 15 | 21,5 | 53 | 20 | M13x1 | 1,0 – 9,0 | 2,0 – 6,5 | 2,0 – 8,0 |
| E3409 | 20 | 28 | 90 | 8 | Tr.20×1,5 | 2,0 – 14,5 | PR | PR |
| E351 | 20 | 28 | 80 | 20 | Tr.20×1,5 | 1,0 – 15,0 | 2,0 – 10,5 | 2,0 – 13,0 |
| E358 | 23 | 32 | 81,5 | 20 | M21x1 | 1,0 – 16,5 | 2,0 – 11,0 | 2,0 – 14,5 |
| E359 | 23 | 32 | 89,5 | 20 | Tr.23×1,5 | 1,0 – 18,0 | 2,0 – 12,0 | 2,0 – 16,0 |
| E363 | 25 | 33,5 | 84 | 16 | M23x1 | 1,0 – 17,5 | 2,0 – 12,5 | 2,0 – 15,5 |
| E366 | 28 | 36 | 100 | 18 | Tr.27×1/20″ | 1,0 – 21,0 | 2,0 – 15,0 | 2,0 – 18,0 |
| E367 | 28 | 38 | 100 | 20 | Tr.28×1,5 | 1,0 – 22,0 | 2,0 – 15,5 | 2,0 – 19,0 |
| E385 | 31,75 | 37,5 | 83 | 10 | Außen: 31,45×1/20″ Innen: 26,44×1,058 |
1,0 – 25,0 | 2,0 – 17,5 | 2,0 – 21,5 |
| E386 | 32 | 45 | 110 | 20 | Tr.32×1,5 | 1,0 – 27,0 | 3,0 – 19,0 | 3,0 – 23,5 |
| E666 | 25 | 35 | 59,5 | 20 | M25x1 | 3,0 – 20,0 | PR | PR |
| K20 | 20 | 28 | 80 | 20 | Tr.20×1,5 | 1,0 – 15,0 | 2,0 – 10,5 | 2,0 – 13,0 |
| K23 | 23 | 32 | 89,5 | 20 | Tr.23×1,5 | 1,0 – 18,0 | 2,0 – 13,0 | 2,0 – 16,0 |
| K32 | 32 | 45 | 110 | 20 | Tr.32×1,5 | 1,0 – 27,0 | 4,0 – 19,0 | 3,0 – 23,5 |
| K45 | 45 | 60 | 140 | 20 | Tr.45×2 | 5,0 – 36,5 | 5,0 – 26,0 | 5,0 – 32,0 |
| KDT38 | 58 | 70,3 | 99 | 15 | M50x1,5 | 10,0 – 38,0 | 8,0 – 26,0 | 8,0 – 32,0 |
S-SLOT
- High and constant clamping force
- Clamping with virtually no clamping marks
- Alternatively usable for profile material (corner clamping)
- Prevents the entry of machining chips, as the collet closes almost completely
- Easy to clean after use
Click on details to compare this product with the standard version
L-SLOT
- High and constant clamping force
- Clamping with virtually no clamping marks
- Alternatively usable for profile material (corner clamping)
- Prevents the entry of machining chips, as the collet closes almost completely
- Easy to clean after use
- Ideal for clamping short clamping surfaces
Click on details to compare this product with the standard version
W-SLOT
- High and constant clamping force
- Clamping with virtually no clamping marks
- Alternatively usable for profile material (corner clamping)
- Prevents the entry of machining chips, as the collet closes almost completely
- Easy to clean after use
Click on details to compare this product with the standard version
Z-SLOT
- High and constant clamping force
- Clamping with virtually no clamping marks
- Alternatively usable for profile material (corner clamping)
- Prevents the entry of machining chips, as the collet closes almost completely
- Easy to clean after use
Click on details to compare this product with the standard version
